DIGITAL PILLING TESTER
VGOTECH DIGITAL PILLING TESTER is a fabric testing instrument / garment testing equipments used to check the pilling resistance of the fabric.
Ø With digital pre-set revolution counter & test template
Ø With Electronic LED Display.
Ø 8 Nos. Pilling Tubes.
Ø Size of wooden box -225 x 225 x 225mm
Ø Thickness of cork -3mm
Ø Speed of rotation -60rpm
Ø Size of test specimen -125 x 125mm
Ø Size of tubes -32 ODx 25.5 ID x 150mm length
Pilling Tester Suppliers is a fabric testing instrument / garment testing equipments used to check the pilling resistance of the fabric.
With digital pre-set revolution counter & test template, With Electronic LED Display.
Pilling is a fabric surface fault characterized by little pills of entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers which protrude from the fabric surface and development of these into spherical bundles anchored to the fabric by a few unbroken fibers. These give a very unsightly look to the garments.
To determine the tendency to form pills, test specimens taken from the fabric sample are rubbed against each other under controlled conditions and the appearance of the test specimen after rubbing for the specified period is compared against standard rating photographs for grading the fabric.
The ‘VGOTECH’ Pilling Tester Suppliers consists of two wooden cubic boxes with inside surfaces lined with cork and outer surfaces laminated. These boxes are rotated about their central axis at a specified speed with the help of a motor and a gear box. A pre-set digital counter stops the motor automatically after the desired number of revolutions.
The test specimens are firmly held around rubber tubes. Four such tubes are placed in each box and then rotated for desired numbers of revolutions after which they are assessed visually against standard rating photographs and graded.
The apparatus is finished in off white stoving enamel and bright chrome / zinc plating. The boxes are covered with a layer of black laminated sheet.
Sixteen Rubber tubes, one insertion tool, and a template for marking on the specimen are supplied as standard accessories.
Size of wooden boxes (Inside) : 225 x 225 x 225 mm
Thickness of cork lining : 3 mm
Speed of rotation of boxes : 60 rpm
Size of test specimen : 125 x 125 mm
Size of rubber tubes : 32 OD x 25.5 ID x 150 mm long
Motor : ¼ H.P Single Phase 220 V AC
Counter : 5 digit preset type stroke counter
IS : 10971 – 1984 : Method for Determination of Pilling Resistance of fabrics.
Minimum 10 years part availability assurance from the date of Invoice.